Clamp fixturing examples

CMM (page 2)

• 
  

  Plastic part held with tension clamps, tension clamp brackets and standoffs

  Fixturing example for the clamps gallery showing a plastic part being held with tension clamps, tension clamp brackets and standoffs.

  [800 x 800] [220kB]
• 
  

  Plastic part held using a screw pusher clamp, adjustable jackstands and standoffs

  Fixturing example for the clamps gallery showing a plastic part being held using a screw pusher clamp, adjustable jackstands and standoffs.

  [800 x 800] [180kB]
• 
  

  Plastic part held using tension clamps, tension clamp brackets and standoffs

  Fixturing example for the clamps gallery showing a plastic part being held with tension clamps, tension clamp brackets and standoffs.

  [800 x 800] [266kB]
• 
  

  Plastic part held with tension clamps, tower block with base, adjustable slide and standoffs

  Fixturing example for the clamps gallery showing a plastic part being held with tension clamps, tower block with base, adjustable slide and standoffs.

  [800 x 800] [192kB]
• 
  

  Plastic part held with tension clamps and standoffs

  Fixturing example for the clamps gallery showing a plastic part being held with tension clamps and standoffs.

  [800 x 800] [207kB]
• 
  

  Fixturing example using a screw pusher clamp

  For the R&R website, screw pusher clamp page fixturing examples.

  [800 x 800] [211kB]
• 
  

  Plastic part being held using spring pusher standoff clamps, adjustable slide, pin standoffs and standoffs

  Fixturing example for the clamps gallery showing a plastic part being held using spring pusher standoff clamps, adjustable slide, pin standoffs and standoffs.

  [800 x 800] [155kB]
• 
  

  Part held using XTensions, soft tip clamps, adjustable jackstand and tower block

  Fixturing example showing a part being held using XTensions, soft tip tension clamps, adjustable jackstand and a tower block with base.

  [513 x 513] [68kB]
• 
  

  Part held using tension clamps, towers and a slide with base

  Fixturing example showing a part being held using tension clamps, towers and a slide with base.

  [800 x 800] [234kB]
• 
  

  Part held using tension clamps, tower block and steel cones

  Fixturing example showing a part being held using tension clamps, a tower block and steel cones.

  [800 x 800] [206kB]
• 
  

  Part held using tension clamps, tension clamp bracket, 4-way spring loaded standoff and adjustable slide

  Fixturing example showing a part being held using tension clamps, tension clamp bracket, 4-way spring loaded standoff and an adjustable slide.

  [800 x 800] [215kB]
• 
  

  Part held using tension clamps, screw pusher clamp and towers

  Fixturing example showing a part being held using tension clamps, screw pusher clamp and towers.

  [800 x 800] [162kB]
• 
  

  Part held using tension clamps and v posts

  Fixturing example showing a part being held using tension clamps and v posts.

  [800 x 800] [143kB]
• 
  

  Parts held using tension clamps and a mini vise

  Fixturing examples showing parts being held using tension clamps and a mini vise.

  [533 x 533] [139kB]
• 
  

  Part held using tension clamps and an adjustable slide

  Fixturing example showing a part being held using tension clamps and an adjustable slide

  [800 x 800] [182kB]
• 
  

  Plastic part held with soft tip spring wire clamps, adjustable jack stand, standoffs and resting pins

  Fixturing example showing a plastic part being held with soft tip spring wire clamps, adjustable jack stand, standoffs and resting pins.

  [800 x 800] [167kB]
• 
  

  Metal part held with screw pusher clamps, tension clamps, adjustable slides, pin standoffs and standoffs

  Fixturing example for the clamps gallery showing a metal part being held with screw pusher clamps, tension clamps, adjustable slides, pin standoffs and standoffs.

  [533 x 533] [123kB]
• 
  

  R&R large adjustable pivot clamp fixturing example

  For the R&R website, fixturing example showing the use of a large adjustable pivot clamp.

  [800 x 800] [183kB]
• 
  

  Plastic part being held with tension clamps, adjustable slides, towers and standoffs

  Fixturing example for the clamps gallery showing a plastic part being held with tension clamps, adjustable slides, towers and standoffs.

  [800 x 800] [167kB]
• 
  

  Plastic part being held with tension clamps, tension clamp bracket, adjustable jackstands and standoffs

  Fixturing example for the clamps gallery showing a plastic part being held with tension clamps, tension clamp bracket, adjustable jackstands and standoffs.

  [800 x 800] [156kB]
• 
  

  Aluminum housing being held using hold down clamps, steel cones and jackstands

  Fixturing example showing an aluminum housing being held using hold down clamps, steel cones and jackstands.

  [800 x 800] [192kB]
• 
  

  Aluminum shaft held with centers and clock location with jackstand

  Fixturing example showing aluminum shaft being held with centers and clock location with jackstand.

  [800 x 800] [199kB]
• 
  

  Plastic part held using tension clamps, adjustable slide and resting pins

  Fixturing example showing a plastic part being held using tension clamps, adjustable slide and resting pins.

  [550 x 550] [90kB]
• 
  

  Part held with a mini vise and jack stand

  Fixturing example showing a part being held using a mini vise and jack stand.

  [747 x 747] [203kB]
• 
  

  Plastic part held using screw pusher clamp, adjustable jackstands and standoffs

  Fixturing example for the clamps gallery showing a plastic part being held using a screw pusher clamp, adjustable jackstands and standoffs.

  [800 x 800] [129kB]
• 
  

  Metal part held with mini vise, adjustable jackstand and standoffs

  Fixturing example for the clamps gallery showing a metal part being held using a mini vise, adjustable jackstand and standoffs.

  [800 x 800] [221kB]
• 
  

  Aluminum part held with tension clamps, tension clamp brackets, and standoffs

  R&R fixturing example showing an aluminum part being held with tension clamps, tension clamp brackets, and standoffs.

  [800 x 800] [157kB]
• 
  

  Aluminum part being held with tension clamp, tension clamp bracket and standoff

  R&R fixturing example showing an aluminum part being held with a tension clamp, a tension clamp brackets, and a standoff.

  [800 x 800] [199kB]
• 
  

  Plastic part being held with tension clamp bracket, adjustable slide, tower and adjustable jack

  R&R fixturing example showing a plastic part being held with a tension clamp bracket, an adjustable slide, a tower, and an adjustable jack stand.

  [800 x 800] [187kB]