Standoff fixturing examples
CMM
Part held using adjustable jack stand, standoffs and soft tip tension clamps
Fixturing example showng a part held using an adjustable jack stand, standoffs and soft tip tension clamps.
[800 x 800][198kB]Aluminum parts held with Standoffs, Tension clamps, and Cones
Aluminum parts held with Standoffs, Tension clamps, and Cones
[800 x 800][156kB]Metal part held with Standoffs, Soft tip tension clamps, Cones and Adjustable jack stand
Metal part held with Standoffs, Soft tip tension clamps, Cones and Adjustable jack stand
[800 x 800][162kB]Aluminum part held with Standoffs, Pin standoffs and Tension clamps
Aluminum part held with Standoffs, Pin standoffs and Tension clamps
[800 x 800][150kB]Aluminum part held with Standoffs and Cones
Aluminum part held with Standoffs and Cones
[800 x 800][208kB]Plastic part being held with standoffs, pin standoffs and tension clamps
Fixturing example showing a plastic part being held with standoffs, pin standoffs and tension clamps.
[800 x 800][198kB]Aluminum part being held with standoffs, standoff adaptors and tension clamps
Fixturing example showing an aluminum part being held with standoffs, standoff adaptors and tension clamps.
[800 x 800][166kB]Cast iron part held with rotator standoff, tension clamps, adjustable jackstand, XTension kit and towers
Fixturing example showing a cast iron part held with a rotator standoff, tension clamps, adjustable jackstand, XTension kit and towers.
[800 x 800][169kB]Cast iron part held with tension clamps, threaded spring post standoffs and pin standoffs
Fixturing example showing a cast iron part held with tension clamps, threaded spring post standoffs and pin standoffs.
[800 x 800][162kB]Plastic part held with threaded spring post standoffs, standoffs, resting pins, tension clamps and towers
Fixturing example showing a plastic part held with threaded spring post standoffs, standoffs, resting pins, tension clamps and towers.
[800 x 800][203kB]Cast iron part held with tension clamps, 2-way and 4-way spring loaded pin standoffs and standoffs
Fixturing example showing a cast iron part held with tension clamps, 2-way and 4-way spring loaded pin standoffs and standoffs.
[800 x 800][219kB]Cast iron part held with tension clamps, 2-way and 4-way spring loaded pin standoff and standoffs
Fixturing example showing a cast iron part being held with tension clamps, 2-way and 4-way spring loaded pin standoffs and standoffs.
[800 x 800][218kB]Multiple parts held with Delrin standoffs, Delrin pin standoffs, adjustable slides, vertical base plate and soft tip tension clamps
Fixturing example showing multiple parts held with Delrin standoffs, Delrin pin standoffs, adjustable slides, vertical base plate and soft tip tension clamps.
[800 x 800][196kB]Plastic part held with Delrin standoff, soft tip tension clamps and adjustable slides
Fixturing example showing a plastic part being held using a Delrin standoff, soft tip tension clamps and adjustable slides.
[800 x 800][210kB]Plastic part held with Delrin pin standoff, soft tip tension clamps and standoff
Fixturing example showing a plastic part held with Delrin pin standoff, soft tip tension clamps and a standoff.
[800 x 800][211kB]Plastic part held using tension clamps and pin standoffs
Fixturing example showing a plastic part being held using R&R tension clamps and pin standoffs.
[533 x 533][101kB]Plastic part held using tension clamp and 4-way spring loaded pin standoff
Fixturing example showing a plastic part being held using a R&R tension clamp and 4-way spring loaded pin standoff.
[534 x 534][72kB]Sheetmetal part held using magnets, tension clamps, tension clamp bracket and 2-way spring loaded pin standoff
Fixturing example showing a sheetmetal part being held using R&R magnets, tension clamps, tension clamp bracket and 2-way spring loaded pin standoff.
[744 x 744][164kB]Sheetmetal stamping held using XTensions, tension clamps, 2-way pin standoffs
Fixturing example showing sheetmetal stamping being held using R&R XTensions, tension clamps and 2-way pin standoffs.
[533 x 533][51kB]Sheetmetal stamping being held using XTensions, tension clamps and 4-way pin standoff
Fixturing example showing sheetmetal stamping being held using R&R XTensions, tension clamps and a 4-way pin standoff.
[533 x 533][47kB]Aluminum part held using soft tip tension clamps and pin standoffs
Fixturing example showing an aluminum part being held using R&R soft tip tension clamps and pin standoffs.
[760 x 760][110kB]Part held using 2-way and 4-way spring-loaded pin standoff
Fixturing example showing a part being held using a 2-way and 4-way spring-loaded pin standoff.
[504 x 504][100kB]Plastic part held using M4 tension clamps and standoffs
Fixturing example showing a plastic part being held using R&R M4 tension clamps and standoffs.
[596 x 596][90kB]Sheetmetal stamping being held using magnet and slides with base
Fixturing example showing a sheetmetal stamping being held using R&R magnet and slides with base.
[600 x 600][113kB]Aluminum housing held using R&R tension clamps, cones and adjustable slides
Fixturing example showing an aluminum housing being held using tension clamps, cones and adjustable slides.
[800 x 800][204kB]Aluminum housing held using tension clamp with plunger, slides with base and standoffs
Fixturing example showing an aluminum housing being held using R&R tension clamp with plunger, slides with base and standoffs.
[579 x 579][96kB]Aluminum and plastic parts held using tension clamps and standoffs
Fixturing example showing aluminum and plastic parts being held using R&R tension clamps and standoffs.
[612 x 612][95kB]Plastic part being held using suction cups, tower, slide with base, tower block, adjustable pivot joint and rotator standoff
Fixturing example showing a plastic part being held using R&R suction cups, exposed suction cups, tower, slide with base, tower block, adjustable pivot joint and rotator standoff.
[682 x 682][106kB]Aluminum part being held using tension clamps, jackstand and slide with base.
Fixturing example showing an aluminum part being held using R&R tension clamps, jackstand and slide with base.
[634 x 634][107kB]Cast iron manifold being held with tension clamps, pin standoffs and standoffs
Fixturing example showing a cast iron manifold being held using R&R tension clamps, pin standoffs and standoffs.
[743 x 743][118kB]Part held using 2-way and 4-way spring-loaded pin standoffs
Fixturing example using a 2-way and 4-way spring-loaded pin standoff.
[800 x 800][178kB]Plastic part held using adjustable jack stand and standoffs
Fixturing example showing a plastic part being held using an adjustable jack stand and standoffs.
[800 x 800][175kB]Aluminum part held using Standoffs, Adjustable jack stands and Tension clamp
Aluminum part held using Standoffs, Adjustable jack stands and Tension clamp
[800 x 800][193kB]
Vision
Plastic part held with Pin standoffs, Soft tip spring wire clamp and Adjustable slides
Plastic part held with Pin standoffs, Soft tip spring wire clamp and Adjustable slides
[800 x 800][92kB]Plastic part held with Pin standoffs and Tension clamps
Plastic part held with Pin standoffs and Tension clamps
[800 x 800][148kB]Plastic part being held with pin standoffs, adjustable jack stand, tension clamp and adjustable slide
Fixturing example showing a plastic part being held with pin standoffs, an adjustable jack stand, a tension clamp and an adjustable slide.
[800 x 800][199kB]Plastic part being held with pin standoffs, adjustable jack stand, tension clamp and adjustable slide
Fixturing example showing a plastic part being held with pin standoffs, an adjustable jack stand, a tension clamp and an adjustable slide.
[800 x 800][206kB]Steel part being held using standoffs, pin standoffs, spring wire clamps and adjustable acrylic slide
Fixturing example showing a steel part being held using R&R standoffs, pin standoffs, spring wire clamps and adjustable acrylic slide.
[533 x 533][60kB]Steel part being held using standoff, V magnet and adjustable slide
Fixturing example showing a steel part being held using a R&R standoff, V magnet and adjustable slide.
[518 x 518][61kB]Aluminum part being held using standoffs, adjustable jackstand, vertical base plate and tension clamps
Fixturing example showing an aluminum part being held using R&R standoffs, adjustable jackstand, vertical base plate and tension clamps.
[533 x 533][90kB]Plastic part being held using pin standoffs and pusher clamp
Fixturing example showing a plastic part being held using R&R pin standoffs and pusher clamp.
[533 x 533][121kB]Plastic part being held using standoffs and tension clamps
Fixturing example showing a plastic part being held using R&R standoffs and tension clamps.
[533 x 533][96kB]Plastic part being held using pin standoffs and tension clamps
Fixturing example showing a plastic part being held using R&R pin standoffs and tension clamps.
[511 x 511][82kB]Brass part held with Delrin standoff, Delrin resting pin, soft tip spring wire clamp
Fixturing example showing a brass part being held using a Delrin standoff, Delrin resting pin, and soft tip spring wire clamp.
[800 x 800][185kB]Plastic part held using pin standoffs and spring wire clamps
Fixturing example showing a plastic part being held using R&R pin standoffs and spring wire clamps.
[467 x 467][85kB]Plastic part being held using pin standoffs, tension clamps and adjustable slide
Fixturing example showing a plastic part being held using R&R pin standoffs, tension clamps and adjustable slide.
[508 x 508][76kB]